The Raynham

External: W 7.25m x D7.25m x H 2.7m

Footprint: 51.5m2

GIFA: 45m2

Living Area: 23.6m2

Bedroom 1: 8.5m2

Bedroom 2: 7.5m2

Shower Suite: 3m2

Flat roof: from £87,000

Pitched roof: from £93,900

+ £2,200 for consultancy-led planning application*

+ £POA for drainage and a water feed

+ £POA for armoured cable installation

*Apply for planning permission before committing to the project purchase, this fee is deductible from the D&B cost when you go ahead with the project.

Plans for this building are available from £350, find them here >

English Oak feather-edged cladding to the walls with anthracite double glazed uPVC units. Colour matched fascias capping a dark brown concrete pan tile for pitched roofs, EPDM rubber roofing for flat roofs.

Taped and jointed plasterboard finish inside, then painted twice in white acrylic silk. Second fix joinery in satin white with stainless steel ironmongery.

Fitted Kitchen

Handle-less door fronts on soft close hinges available in a range of colours with a selection of laminate worktop finishes. 3pc AEG cooking package and fridge.

Shower Suite

Glazed bi-folding shower enclosure, floor mounted toilet, countertop basin and electric towel radiator.

Heating

Electric panel radiators with programmable 24hr timer and lot20 energy technology. Average U-Value of 0.11 W/m2K exc. windows and doors.

Natural lighting

Fenestration designed to cover 25% GIFA with 28mm Low-E, solar reflective (70%) glazing.

Internal joinery

Skirting, architraves and 826mm Mexicana doors on chromed ironmongery.

Extras

‘Slat wall’ accents available on request, among other options such as back-lit mirrors, breakfast bars and media storage. Air conditioning, UFH and solar PV on enquiry.

Foundation

Suspended timber frame floor supported by galvanised ground screws. Insulated with PIR to achieve 0.11 W/m2K.

or

Min. C28 grade concrete raft with radon barrier and A142 reinforcement, insulated to achieve 0.11 W/m2K.

Frame

140mm timber framing to BS EN 5268 insulated with dual-layer PIR. Sheathed externally with residual cladding cavities to achieve 0.12 W/m2K.

Roof

‘Warm’ flat roof insulated with dual-layer PIR to achieve 0.11 W/m2K, finished with either bituminous or 060 EPDM covering and PCV fasica.

or

‘Warm’ pitched roof insulated with dual-layer PIR to achieve 0.11W/mK2, finished with concrete pan tiles.

Glazing

28mm double glazing with PlanithermR solar reduction film, mounted in uPCV frames with trickle vents to achieve 1.0 W/m2K.

Electrical

EICR certified electrical fit out including x2 double sockets per room (+ x2 doubles for kitchen), media outlet, dimmable LED lighting, extract ventilators where required and programmable electric radiators.120ltr G3 certified unvented hot water tank to feed basins and shower.

Plumbing

120ltr G3 certified unvented hot water tank to feed basins and shower.